Instalar Builds

INSTRUCCIONES PARA INSTALAR LOS BUILDS DE RED

Para cualquier modificación de Build o Firmware debes tener la aprobación por escrito de Éxodo Rental. La manipulación interna o externa sin permiso expreso está terminantemente prohibida y anula el seguro.

1. RELEASE DATE: 2011-03-10

RED ONE Firmware (Release Version) V 30.7.0 Windows/OSX

RED ONE Build 30 v30.7.0 Mar 09. 2011

SUMMARY:
Support for Mysterium-X sensor, FLUT, REDcolor Color Science, expansion of ISO Range (with Mysterium-X), modification of RGB and RAW metering, RAW Exposure meters, REDCODE 42 for 3K and 2K recordings, false color MULTI User Key, LOOK file import from REDCINE-X, CLEAN feed output, monitor path video FLIP for 3D beam splitter and inverted camera mount applications, freeze analog TIME OF DAY timecode output when not in Record, EDGE CODE value added to HANC on HD-SDI, GPIO trigger of COLOR, Shutter entry in Degrees, Support for Bomb-EVF Viewfinder, Enhanced system level support for RED 1.8″ SSD Media

Notes:

After upgrading to Build 30, on-camera playback of media recorded by earlier builds may not be possible, nor can you add additional clips to digital media formatted under an earlier build.

Mysterium-X sensor based cameras may not use firmware prior to Build 30.

Mysterium sensor based cameras may be downgraded, but not to firmware prior to Build 16.

Ensure you reformat any digital media and Black Shade before

Ensure you reformat any digital media and Black Shade before shooting under Build 30.

Download the latest versions of REDCINE-X and/or ROCKETCINE-X from www.red.com/support

Third party post tools may need to be updated to reflect FLUT and REDcolor color science.

Installation Instructions for RED-ONE Build 30 v30.7.0 camera firmware.

This upgrade is fully contained in the folder ” build_30_v30.7.0 ” In that folder is a copy of this Read Me file and the folder named ” upgrade “

The ” upgrade ” folder includes the camera firmware upgrade file ” redone.su “

DO NOT rename this folder, the camera only opens a folder named ” upgrade ”

DO NOT decompress the ” redone.su ” file, the camera will perform that task.

For Mysterium sensor based cameras, format a CF or SSD card using Build 20, 21, or a Beta Build 30.

For Mysterium-X sensor based cameras, format a CF or SSD card using a Beta Build 30. Connect the CF or SSD card to your P.C or Macintosh via a CF or SSD card reader.

Copy the folder called ” upgrade ” onto the CF or SSD card. Unmount the CF or SSD card from your computer (drag to the trash can).

Ensure your camera is powered down.

Insert the CF or SSD card into the CF or SSD card slot of your RED-ONE camera.

Power up the camera.

After booting up, the camera rear status display will report ” New Firmware ” and the RED-EVF or RED-LCD will report “A software update is available for your system”

Press the joystick to confirm, and the rear status display will report ” Upgrading ”

During the upgrade process, a blue progress bar will be visible on the RED-EVF or RED-LCD.

This bar will continue for the duration of the upgrade, which is approximately five minutes.

At the end of the upgrade process, the rear status display will report “O.K. Cycle Power” The RED-LCD or RED-LCD will report ” Upgrade complete. Power cycle the camera to continue. ”

Power down the camera, wait five seconds, then power up the camera.

Verify that the camera rear status display and or monitors report back –

PIN (value specific to camera) Build 30 Version 30.7.0 Installation is now complete.

Note:

After the firmware upgrade, it is mandatory that you re-format a CF or SSD card and perform a BLACK SHADING calibration.

At the end of Black Shading remember to power cycle the camera. Operation without performing a BLACK SHADING calibration after firmware updates or downgrades usually creates significant color errors.

Significant changes since Build 30.6.12

Enhanced system level support for RED 1.8″ SSD Media.

Significant changes since Build 30.5.0

Resolved Genlock syncing error following return from on-camera clip PLAYBACK.

Improved Blue channel image quality for RED ONE cameras with Mysterium sensor.

Improved Blue and Red channel performance under highly saturated green screen.

Resolved image capture error with 2K resolution recording at 117 – 120 fps.

Addition of MEDIA MODEL and MEDIA SERIAL number to VIEW STATUS menu.

Correction of VIEW status in UI when VIEW switched by GPI or User Key.

Correction of FOCUS false color error when operating in VIEW = RAW.

Correction of LOG file write confirmation error when no media is attached.

Support for RED 1.8″ SSD Media

Support for Bomb-EVF viewfinder.

Support for FIXED and SYNC monitor modes with Bomb-EVF Support for User Key 3 and 4 functions from Bomb-EVF.

Support for TALENT tally with Bomb-EVF.

Note:

Bomb-EVF can display upper 784 lines or lower 784 rows of 1280 × 848 pixel viewfinder output. To toggle
between these, press both User Key 3 and User Key 4 on the front surface of the Bomb-EVF.

Note:

Bomb-EVF currently operates at a fixed intensity.

Operational notes regarding Build 30 series firmware.

Mysterium-X sensor based cameras may not be downgraded to firmware prior to Build 30.

Mysterium sensor based cameras may not be downgraded to firmware prior to Build 16.

Non Build 30 formatted media may report as “INCOMPATIBLE”- if so, reformat to clear.

Non-speed verified CF cards are limited to 2K record resolution.

Selecting RESTORE / LOOK resets MX sensor to ISO 320 rather than to the ISO 800 default value.

Image Magnify is available during preview, but not during according or playback.

Cannot exchange LOOK (.RLK) files between cameras using Build 30 and Build 21 or earlier.

GUI on HD Preview is limited to LOOK AROUND only if both RED-EVF and RED-LCD are active.

HD-SDI and HDMI are True Progressive, and do not support 1080i or 1080 PsF signal formats.

Timecode displayed in GUI is not frame accurate, always reference HD-SDI and .R3D timecode.

When recording at a multiple of Genlock reference frame rate, UI may not indicate Genlock.

Monitor path outputs may experience a temporary disturbance when:

Enabling first / disabling last audio channel

Entering and exiting Image Magnify

RED-EVF and Bomb EVF, operating in SYNC refresh mode, may experience a temporary disturbance when:

exiting OPEN GATE mode exiting MAGNIFY at 4K resolution

changing Project RESOLUTION changing Varispeed frame rate

Descarga el RED Build_31_v31.6.16

Descarga el RED Build_30_v30.7.0

Instalar Builds

INSTRUCCIONES PARA INSTALAR LOS BUILDS DE RED

Paquetes de cámara

Servicios

Sistemas de descarga

Ópticas

Alquiler

Contacto

Ponte en contacto con nosotros

Enviar mensaje

Alquiler de equipos

Promociones

Servicios

Ópticas

Packs de cámara